Ultra-TrackPans®
Capture Hazardous Spills From Railroad Tanker Cars
- Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
- Prevent Costly Cleanup and Regulatory Fines
- Modular Design - Center and Side Pans are 53.5" long; containment areas can be easily assembled to any length desired
- All-polyethylene Construction - Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from -40 ° F to +140 ° F
- Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.
- Trucks and other vehicles can drive over TrackPans with grates in place*
- Economical, easy to install
- Modular TrackPan design can be customized to meet your specific needs.
|
|
- Optional TrackPan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.
- Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.
- Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.
|
|
|
- Ultra-TrackPans Are Available In Two (2) Models:
- TrackPans and Grates, No Covers
- TrackPans with Grates and Covers
- Low Maintenance - unlike carbon steel track pans, Ultra-TrackPans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
- Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
- Long Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.
|
* To drive over TrackPans, firm footing must be beneath the Pans; also must "ramp up" to Side Pans with asphalt or concrete.
|
| TrackPans with Grates, No Covers |
TrackPan Covers Only |
| Part# 9566 - Center TrackPan with Grates |
Part# 9580 - Cover for Center TrackPan |
| Dimensions: 53 ½" x 53&frec12;" x 6" |
Dimensions: 56" x 54" |
| Weight: 106 lbs. |
Weight: 24 lbs. |
| Containment Capacity: 18 gallons |
|
Includes: 2 bulkhead fittings, 4 gaskets
and 2 grates |
|
| |
|
| Part# 9566 - Side TrackPan with Grates |
Part# 9581 - Cover for Side TrackPan |
| Dimensions: 53½" x 27½" x 6" |
Dimensions: 56" x 27¾" |
| Weight: 60 lbs. |
Weight: 11 lbs. |
| Containment Capacity: 19 gallons |
|
Includes: 1 bulkhead fitting, 2 gaskets
and 1 grate |
|
| |
| Options |
| Part# 9584 - Rebar Fasteners with Protective
Caps (20-pack) |
| Part# 9559 - 3" dia. Bulkhead Fitting (for
below grade piping) |
| Part# 9586 - Sorbent Mats, Center Pan (2/set),
10-pack |
| Part# 9585 - Sorbent Mats, Side Pan 20-pack |
Part# 9571 - Grate Only for Center Pan (Left)
Part# 9571 - Grate Only for Center Pan (Right) |
| Part# 9573 - Grate Only for Side Pan |
| |
| Chemical Compatibility Guide |
| U.S. Patent Nos. 5,562,047; 6,173,856; Other Pat. Pending |
|
